MOISTURE BARRIERS

Holding strong.
With system solutions that can do more.

EPOXY MOISTURE BARRIER 2K EP 170

High-quality, low-emission, two-component epoxid resin system for blocking moisture on cement screed and concrete.

For blocking excessive indoor residual moisture up to (99%Relative) 6 CM% in concrete substrates and cement screeds. A compound seal for concrete surfaces in ground contact and new concrete substrates with high residual moisture as well as for priming or surface strengthening of all common, absorbent and nonabsorbent building substrates inside and out. Can be used as the binder to form EP mortar with quartz sand 0.063 – 3.5 mm. Not suitable as a barrier against high hydrostatic pressure. Consultation required for use with underfloor heating systems.

For Technical Data, click the icon below:

FLUID FOIL 1 KS

Solvent-free, water-impermeable, single-component, permanently elastic, seamless and jointless compound seal.
Indoor use only. Suitable for jointless sealing of wall and floor surfaces in wet areas (e.g. showers, bathrooms, steam baths etc.) to protect against pressureless water directly below the ceramic covering. Corresponds to EN 14891, ÖNORM B 3407 W1-W4 and is in accordance with the ZDB bulletin for wet duty classification A0 as well as duty class A in accordance with the test principles for issuing a general building inspection certificate.

For Technical Data, click the icon below:

SEALING AND DECOUPLING MEMBRANE AE 100

Waterproof, tension relieving, flexible, crack bridging, alkali-resistant sealing and decoupling membrane for safe surface sealing in conjunction with tiles, boards and natural stone. Especially suited for rapid further processing, while at the same time guaranteeing an even layer thickness!
For producing a compound seal inside and outside directly under the ceramic covering for the wall and floor area, showers, domestic baths, public as well as private balconies and terraces as well as in commercial kitchens. Corresponding to ÖNORM B 3407 W1-W6 and according to the ZDB data sheet for moisture resistance class A0 and B0, as well as resistance class A and C applicable according to the test principles for issuing a general building authority test certificate.

For Technical Data, click the icon below:

SELF-ADHESIVE SEALING TAPE DBS 50

Self-adhesive sealing tape made from butyl coated polypropylene fleece, with divided, overlapping silicone paper covering. Coated with highly elastic, self-adhesive butyl rubber.
System component for sealing in wall and floor areas. For bridging and sealing connecting and corner joints.

For Technical Data, click the icon below:

MUREXIN-UK

System solutions that can do more.

Call Now Button