COMPOUNDS

Holding strong.
With system solutions that can do more.

SMOOTHING COMPOUND BASIC NB 10

Synthetic resin-modified cement powder, low-stress, low-emmision, hydraulically setting smoothing compound.

CT- C25- F6 according to EN 13813, fire classification A1

For indoor use only, provides a smooth absorbent surface, in thicknesses from 2 to 10 mm, suitable under most types of floor covering, including for the installation of natural stone and ceramic tiles. Suitable over underfloor heating and for castor chair use.

For Technical Data, click the icon below:

LEVELLING COMPOUND CA 20

Powdery, preformed, self-levelling compound based on calcium sulphate. Only indoors to create level substrates, especially on calcium sulphate bound screeds, as well as on mastic asphalt and all standard screeds in old and new builds in layer thicknesses of 2 – 20 mm before laying floor coverings and parquet. Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

LEVELLING COMPOUND FZ15

Self-levelling, flowable, pumpable, preformed, polymer-modified levelling compound.

Only indoors, for load-bearing cement screeds and indoors concrete. Limited to calcium sulphate screeds. To produce even substrates with absorbency in layer thicknesses of up to 10 mm before laying parquet and floorcoverings of all sorts, suitable for underfloor heating systems and castor wheel loads. Castor-wheel-prooffrom 2 mm layer thickness, not suitable for areas used commercially.

For Technical Data, click the icon below:

FILLING AND REPAIR COMPOUND CA 85

Stable, quick drying, preformed filling and repair compound based on calcium sulphate.

Only indoors. For evening out and repair work as well as filling of holes and deep unevenness in calcium sulphate (flow), xylolite, magnesium and mastic asphalt screeds, as well as for evening out and filling of dry screeds and dry building elements based on gypsum. Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

LEVELLING COMPOUND FZ 100

Self-levelling, flowable, pumpable, preformed, polymer-modified levelling compound. Mixed with special plasticizer, with very smooth surface, easy to sand and quick drying.

Only indoors, for load-bearing cement screeds and indoors concrete. Limited to calcium sulphate screeds. To produce even surfaces in layer thicknesses of up to 20 mm before laying floor coverings and parquet. Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

FILLING AND REPAIR COMPOUND SF 80

Powdery, synthetic resin-modified, stable, quick drying, preformed, hydraulically setting repair compound.

Only indoors for floor and wall areas for improvement and plastering of steps and podiums, as well as the filling of holes and deep unevennesses in screed and concrete surfaces in layer thicknesses of up to 50 mm.

Also suitable for underfloor heating systems and for castor wheel loads.

For Technical Data, click the icon below:

MAX DEEP ST 25

Fine, plastic-tempered, low-tension, self-levelling, hydraulically setting levelling compound.

CT- C25 – F5 according to EN 13813, fire classicification A1 fl.

Only indoors to produce even substrates in layer thicknesses from 2 to 50 mm before laying all types of floor coverings, as well as before laying tiles and natural stone flooring. For smoothing out extreme unevenness, such including hollow core slabs, decking slabs, and large area level compensation. Suitable for underfloor heating systems and castor wheel loads according to DIN EN 12529.

For Technical Data, click the icon below:

LEVELLING COMPOUND MAXIMO M 61

Heat-retaining, self-levelling special filling compound with high yield and high absorbency. Very low emission, drying by hydration. Up to 27% higher yield!

Only indoors to produce even substrates with high absorbency in layer thicknesses of up to 15 mm before laying floor coverings and parquet. Especially suited to underfloor heating systems, as energy savings of up to 12% are possible, and for the laying of rubber and polyolefin coverings where a high absorbency of the levelling compound is required.

For Technical Data, click the icon below:

MUREFIX MF 4

Powdery, highly synthetic resin-modified, stable, quick drying, preformed, hydraulically setting repair compound. Can be processed on most substrates, also without undercoat, and can be drawn level. Only indoors, on floor and wall surfaces. For the improvement of the most diverse of substrates, filling holes and unevenness in cement and AFE screeds and concrete surfaces, as well as smoothing chipboard. For partial levelling of old and new filling layers. Can be used in surface fillings in layer thicknesses from 0 – 4 mm.

Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

TIMBER FLOORING LEVELLING COMPOUND NH 75

Powdery, fibre-reinforced, self-levelling, hydraulically setting levelling compound.

Only indoors for production of flat and even substrates in layer thicknesses from 3 to 20 mm before laying floor coverings of all types, especially wooden floor boards, chipboard and old floors and in renovation areas.

Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

RAPID FILLING COMPOUND SL 52

Powdery synthetic resin-modified special filling compound, for subsequent quick laying. Preformed, selflevelling,hydraulically setting low-dust levelling compound with special cement. Floor coverings can be laid after 1 to 2 hrs, parquet after 4 hrs.

Only indoors to produce even substrates in layer thicknesses of up to 20 mm before laying floor coverings and parquet. Suitable for underfloor heating systems and castor wheel loads.

For Technical Data, click the icon below:

STYROFOAM BINDING AGENT SB 60

Powdery, yellow pigmented binding agent for bound, load-bearing, heat and noise insulating levelling filler with polystyrene granulate, for example.

On bare ceilings, on timber ceilings, between wooden tram sites, floor panels, vaulted ceilings, for insulating flat roofs with a gradient and as backfill material for pool systems.

For Technical Data, click the icon below:

MUREXIN-UK

System solutions that can do more.

Call Now Button